64 HP DeskJet Plus 4120

Print on envelopes with an HP DeskJet Plus 4120 printer Print a name and address on envelopes using a word processing app, your contacts list, or pre-formatted templates. Load envelopes into the printer How you load envelopes depends on what type of printer you have and where the paper input tray is located. CAUTION: To avoid jams and printer damage, do not print envelopes with clasps, windows, shiny surfaces, or coated linings. If you have a LaserJet printer, do not use envelopes with self-stick adhesives or other materials that are susceptible to heat. Load the envelopes into the main input tray. Inkjet printers with a front tray : Front of envelope facing down and the flap to the left Inkjet printers with a rear tray : Front of envelope facing up and the flap to the left LaserJet printers with a front tray : Front of envelope facing up and the flap to the left Slide the paper width guides in until they rest against the edges of the envelopes. P...

HP DeskJet Plus 4120 printers - 'We're sorry, something went wrong' error (EBS00P0004) During setup of your HP printer, a  We're sorry, something went wrong  error with code  EBS00P0004  displays in the HP Smart app. This issue occurs when two or more devices are connected to the same mobile router using Wi-Fi. The privacy separator feature of the mobile router prevents devices from communicating with each other. Because of this, the computer or mobile device cannot communicate with the printer. Resolve error EBS00P0004 Disable the privacy separator feature to complete the setup and print, or use one of the following workarounds to print. Temporarily disable the privacy separator feature in the mobile router, complete the setup, and then print. NOTE: Alternative names for privacy separator can be Client isolation, AP isolation, or Intra-BSS communication. After the setup completes, re-enable the privacy separator feature. Perform one of the fol...

HP DeskJet Plus 4100 printers - First time printer setup HP DeskJet Plus 4120 How to properly unbox and set up an HP DeskJet Plus 4100 series printer. Remove the printer from the box The printer should be unboxed and set up on a clear, level surface with easy access to a power outlet. CAUTION: To avoid setup problems and potential printer damage, make sure all internal packing material is removed, all doors are closed, and all trays are reinserted before turning on the printer. Set the box on its side and remove the printer and all other materials from the box. Remove all tape and packing materials from the outside of the printer. On the front of the printer, lower the output tray. Remove all tape and cardboard from the cartridge access door and from the inside of the printer. Close the ink cartridge access door. Recycle the box and packaging materials. Go to www.hp.com/recycle to learn more. Connect the power cord The print...

HP DeskJet Plus 4120 printers - 'We're sorry, something went wrong' error (EBS00P0004) During setup of your HP printer, a  We're sorry, something went wrong  error with code  EBS00P0004  displays in the HP Smart app. This issue occurs when two or more devices are connected to the same mobile router using Wi-Fi. The privacy separator feature of the mobile router prevents devices from communicating with each other. Because of this, the computer or mobile device cannot communicate with the printer. Resolve error EBS00P0004 Disable the privacy separator feature to complete the setup and print, or use one of the following workarounds to print. Temporarily disable the privacy separator feature in the mobile router, complete the setup, and then print. NOTE: Alternative names for privacy separator can be Client isolation, AP isolation, or Intra-BSS communication. After the setup completes, re-enable the privacy separator feature. Perform one of the fol...

HP DeskJet Plus 4120 printer setup (Windows built-in driver) Set up your printer using the printer drivers that come built into Windows. NOTE: HP recommends installing HP Smart - Microsoft Store (in English), or the full-feature driver from 123.hp.com to get the most out of your printer. Add a network printer to Windows Set up a Wi-Fi or wired network printer in Windows without installing any additional drivers. Procedure Search Windows for and open  Change device installation settings , and then make sure Yes (recommended) is selected. Place the printer and the computer near the Wi-Fi router. Connect the printer to the same network that your computer is connected to. Wi-Fi connection for printers with a touchscreen control panel: Open the Setup, Network, or Wireless settings menu, select Wireless Setup Wizard, and then follow the instructions to select the network name and enter the password. ...