Restore Wi-Fi setup mode on your HP DeskJet Plus 4120 printer

Restore Wi-Fi setup mode on your HP DeskJet Plus 4120 printer

Restore Wi-Fi setup mode on most HP DeskJet Plus 4120 printers

Use the control panel on your printer to restore Wi-Fi setup mode.

Printers with a touchscreen display

Use the touchscreen to restore Wi-Fi setup mode.

  1. On the printer control panel, touch the Setup icon  or Wireless icon .

  2. Select Network setup or Settings, and then select Restore Network Settings.

    NOTE:

    Your control panel might look different than the following example, but the steps are the same.

  3. If a confirmation prompt displays, touch Yes.

  4. Wait 60 seconds until the Wireless light blinks blue.

  5. Within two hours, return to the app or software to find and add your printer and complete the setup.

HP inkjet and ink tank printers without a touchscreen

Use the Cancel and Wireless buttons to restore Wi-Fi setup mode.

  1. Press the Cancel button  to ready the printer.

  2. Press and hold the Wireless button  and Cancel button  simultaneously until the Power button blinks.

    NOTE:

    Your control panel might look different than the following example, but the steps are the same.

  3. Wait 60 seconds until the Wireless light blinks blue.

  4. Within two hours, return to the app or software to find and add your printer and complete the setup.

HP LaserJet printers without a touchscreen

Use the Cancel and Wireless buttons to restore Wi-Fi setup mode.

  1. Press the Cancel button  to ready the printer.

  2. Press and hold the Wireless button  until the Attention light blinks.

    NOTE:

    Your control panel might look different than the following example, but the steps are the same.

  3. Wait 60 seconds until the Wireless light blinks blue.

  4. Within two hours, return to the app or software to find and add your printer and complete the setup.

HP DeskJet 2700, 2700e, 2800, 2800e, 4100, 4100e, 4200, 4200e, Ultra 4800, 4900 printers

Use the Cancel and Wireless buttons to restore Wi-Fi setup mode.

  1. Press the Cancel button  to ready the printer.

  2. Press and hold the Wireless button  and the Cancel button  at the same time for five seconds until the Power button starts blinking.

    NOTE:

    Your control panel might look different than the following example, but the steps are the same.

  3. Wait until the blue Wireless button light blinks continuously.

  4. Within two hours, return to the app or software to find and add your printer and complete the setup.

https://support.hp.com/us-en/document/ish_3967769-3956733-16

Komentar

Posting Komentar